Lab 20. Filtering Prefix List In

Mei 07, 2017
Assalamu'alaikum Warohmatullahi Wabarokatuh...
baik sahabat configer kali ini saya akan sedikit sharing mengenai default route static route

kali ini kita akan coba filtering prefix list in untuk skema jaringannya seperti ini 

Sekarang kita akan konfigurasi ip dan eigrp pada semua router :

Router 1

R1(config)#int lo0
R1(config-if)#ip add 1.1.1.1 255.255.255.255
R1(config)#int se1/0
R1(config-if)#ip add 12.12.12.1 255.255.255.0
R1(config-if)#no shutdown
R1(config)#router eigrp 10
R1(config-router)#net 0.0.0.0

Router 2
R2(config)#int lo0
R2(config-if)#ip add 2.2.2.2 255.255.255.255
R2(config-if)#exit
R2(config)#int se1/0
R2(config-if)#ip add 12.12.12.2 255.255.255.0
R2(config-if)#no sh
R2(config)#int f0/0
R2(config-if)#ip add 23.23.23.2 255.255.255.0
R2(config-if)#no sh
R2(config)#router eigrp 10
R2(config-router)#net 0.0.0.0

Router3
R3(config-if)#int lo0
R3(config-if)#ip ad 3.3.3.3 255.255.255.255
R3(config-if)#int lo1
R3(config-if)#ip ad 3.3.3.17 255.255.255.240
R3(config-if)#int lo2
R3(config-if)#ip ad 3.3.3.33 255.255.255.248
R3(config-if)#int lo3
R3(config-if)#ip add 3.3.3.100 255.255.255.224
R3(config)#int lo4
R3(config-if)#ip add 3.3.3.150 255.255.255.252
R3(config-if)#int lo5
R3(config-if)#ip add 3.3.3.200 255.255.255.240
R3(config-if)#int f0/0
R3(config-if)#ip add 23.23.23.1 255.255.255.0
R3(config-if)#router eigrp 10
R3(config-if)#net 0.0.0.0

setelah selesai kita cek ip route dan test ping koneksinya

R1(config-router)#do sh ip route 
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set

      1.0.0.0/32 is subnetted, 1 subnets
C        1.1.1.1 is directly connected, Loopback0
      2.0.0.0/32 is subnetted, 1 subnets
D        2.2.2.2 [90/2297856] via 12.12.12.2, 00:05:41, Serial1/0
      3.0.0.0/8 is variably subnetted, 6 subnets, 5 masks
D        3.3.3.3/32 [90/2300416] via 12.12.12.2, 00:00:49, Serial1/0
D        3.3.3.16/28 [90/2300416] via 12.12.12.2, 00:00:49, Serial1/0
D        3.3.3.32/29 [90/2300416] via 12.12.12.2, 00:00:49, Serial1/0
D        3.3.3.96/27 [90/2300416] via 12.12.12.2, 00:00:49, Serial1/0
D        3.3.3.148/30 [90/2300416] via 12.12.12.2, 00:00:49, Serial1/0
D        3.3.3.192/28 [90/2300416] via 12.12.12.2, 00:00:49, Serial1/0
      12.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C        12.12.12.0/24 is directly connected, Serial1/0
L        12.12.12.1/32 is directly connected, Serial1/0
      23.0.0.0/24 is subnetted, 1 subnets
D        23.23.23.0 [90/2172416] via 12.12.12.2, 00:05:41, Serial1/0

R1#ping 1.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms

R1#ping 2.2.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/11/16 ms

R1#ping 3.3.3.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/32/40 ms

konfigurasikan prefix-list filtering di R2
R2(config)#ip prefix-list EIGRP_IN seq 10 deny 3.3.3.0/24 le 28
R2(config)#ip prefix-list EIGRP_IN seq 20 permit 0.0.0.0/0 le 32 
R2(config)#router eigrp 10
R2(config-router)#distribute-list prefix EIGRP_IN in

maka semua network 3.3.3.x/24-/28 akan di deny
R2(config-router)#do sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set

      1.0.0.0/32 is subnetted, 1 subnets
D        1.1.1.1 [90/2297856] via 12.12.12.1, 00:13:29, Serial1/0
      2.0.0.0/32 is subnetted, 1 subnets
C        2.2.2.2 is directly connected, Loopback0
      3.0.0.0/8 is variably subnetted, 3 subnets, 3 masks
D        3.3.3.3/32 [90/156160] via 23.23.23.1, 00:08:37, FastEthernet0/0
D        3.3.3.32/29 [90/156160] via 23.23.23.1, 00:08:37, FastEthernet0/0
D        3.3.3.148/30 [90/156160] via 23.23.23.1, 00:08:37, FastEthernet0/0
      12.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C        12.12.12.0/24 is directly connected, Serial1/0
L        12.12.12.2/32 is directly connected, Serial1/0
      23.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C        23.23.23.0/24 is directly connected, FastEthernet0/0
L        23.23.23.2/32 is directly connected, FastEthernet0/0

Alhamdulillah postingan kali ini telah selesai, jika artikel ini terasa bermanfaat silahkan bisa di share dengan menekan salah satu button dibawah ini.

Wassalamu'alaikum ...

Share this :

Previous
Next Post »
0 Komentar

Penulisan markup di komentar
  • Silakan tinggalkan komentar sesuai topik. Komentar yang menyertakan link aktif, iklan, atau sejenisnya akan dihapus.
  • Untuk menyisipkan kode gunakan <i rel="code"> kode yang akan disisipkan </i>
  • Untuk menyisipkan kode panjang gunakan <i rel="pre"> kode yang akan disisipkan </i>
  • Untuk menyisipkan quote gunakan <i rel="quote"> catatan anda </i>
  • Untuk menyisipkan gambar gunakan <i rel="image"> URL gambar </i>
  • Untuk menyisipkan video gunakan [iframe] URL embed video [/iframe]
  • Kemudian parse kode tersebut pada kotak di bawah ini
  • © 2015 Simple SEO ✔