Lab 27. EIGRP Stub Receive Only

Assalamu'alaikum Warohmatullahi Wabarokatuh...
baik sahabat configer kali ini saya akan sedikit sharing mengenai EIGRP Stub Receive Only

kali ini kita akan coba EIGRP Stub Receive Only untuk skema jaringannya seperti ini 

Sekarang kita akan konfigurasi ip dan eigrp pada semua router :

Router 1

R1(config)#int lo0
R1(config-if)#ip add 1.1.1.1 255.255.255.255
R1(config)#int se1/0
R1(config-if)#ip add 12.12.12.1 255.255.255.0
R1(config-if)#no shutdown

R1(config)#router eigrp 10
R1(config-router)#net 0.0.0.0
R1(config-router)#no auto-summary

Router 2

R2(config)#int lo0
R2(config-if)#ip add 2.2.2.2 255.255.255.255
R2(config-if)#exit
R2(config)#int se1/0
R2(config-if)#ip add 12.12.12.2 255.255.255.0
R2(config-if)#no sh
R2(config)#int f0/0
R2(config-if)#ip add 23.23.23.2 255.255.255.0
R2(config-if)#no sh
R2(config)#router eigrp 10
R2(config-router)#net 0.0.0.0
R2(config-router)#no auto-summary

Router3

R3(config)#int lo0
R3(config-if)#ip add 3.3.3.3 255.255.255.255
R3(config-if)#ex
R3(config)#int f0/0
R3(config-if)#ip add 23.23.23.1 255.255.255.0
R3(config-if)#no sh
R3(config-if)#ex
R3(config)#router eigrp 10
R3(config-router)#net 0.0.0.0
R3(config-router)#no auto-summary

setelah selesai kita cek ip route dan test ping koneksinya

R1#sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is not set
1.0.0.0/32 is subnetted, 1 subnets
1.1.1.1 is directly connected, Loopback0
2.0.0.0/32 is subnetted, 1 subnets
2.2.2.2 [90/2297856] via 12.12.12.2, 00:10:43, Serial1/0
3.0.0.0/32 is subnetted, 1 subnets
3.3.3.3 [90/2300416] via 12.12.12.2, 00:05:37, Serial1/0
12.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
12.12.12.0/24 is directly connected, Serial1/0
12.12.12.1/32 is directly connected, Serial1/0
23.0.0.0/24 is subnetted, 1 subnets
23.23.23.0 [90/2172416] via 12.12.12.2, 00:05:39, Serial1/0

R1#ping 1.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms

R1#ping 2.2.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/11/16 ms

R1#ping 3.3.3.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/32/40 ms

sekarang tambahkan perintah berikut pada R2

R2(config-if)#router eigrp 10
R2(config-router)#eigrp stub receive-on

silahkan lihat routing table dari semua router dan dan teliti pastikan R2 hanya menerima routing update.
Alhamdulillah postingan kali ini telah selesai, jika artikel ini terasa bermanfaat silahkan bisa di share dengan menekan salah satu button dibawah ini.

Wassalamu'alaikum ...

Share this :