Lab 8 EIGRP - Unicast Update

Assalamu'alaikum Warohmatullahi Wabarokatuh...
baik sahabat configer kali ini saya akan sedikit sharing mengenai EIGRP Authentication seperti biasa kita konfigurasi dulu eigrp seperti pada lab - lab sebelumnya 

Sekarang kita akan konfigurasi ip dan eigrp pada semua router :

Router 1

R1(config)#int lo0
R1(config-if)#ip add 1.1.1.1 255.255.255.255
R1(config)#int se1/0
R1(config-if)#ip add 12.12.12.1 255.255.255.0
R1(config-if)#no shutdown
R1(config)#router eigrp 10
R1(config-router)#net 1.1.1.1 0.0.0.0
R1(config-router)#net 12.12.12.1 0.0.0.0
R1(config-router)#no auto-summary

Router 2

R2(config)#int lo0
R2(config-if)#ip add 2.2.2.2 255.255.255.255
R2(config-if)#exit
R2(config)#int se1/0
R2(config-if)#ip add 12.12.12.2 255.255.255.0
R2(config-if)#no sh
R2(config)#int f0/0
R2(config-if)#ip add 23.23.23.2 255.255.255.0
R2(config-if)#no sh
R2(config)#router eigrp 10
R2(config-router)#net 12.12.12.2 0.0.0.0
R2(config-router)#net 2.2.2.2 0.0.0.0
R2(config-router)#net 23.23.23.2 0.0.0.0
R2(config-router)#no auto-summary

Router3

R3(config)#int lo0
R3(config-if)#ip add 3.3.3.3 255.255.255.255
R3(config-if)#ex
R3(config)#int f0/0
R3(config-if)#ip add 23.23.23.1 255.255.255.0
R3(config-if)#no sh
R3(config-if)#ex
R3(config)#router eigrp 10
R3(config-router)#net 3.3.3.3 0.0.0.0
R3(config-router)#net 23.23.23.1 0.0.0.0
R3(config-router)#no auto-summary

setelah selesai kita cek ip route dan test ping koneksinya

R1#sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is not set
1.0.0.0/32 is subnetted, 1 subnets
1.1.1.1 is directly connected, Loopback0
2.0.0.0/32 is subnetted, 1 subnets
2.2.2.2 [90/2297856] via 12.12.12.2, 00:10:43, Serial1/0
3.0.0.0/32 is subnetted, 1 subnets
3.3.3.3 [90/2300416] via 12.12.12.2, 00:05:37, Serial1/0
12.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
12.12.12.0/24 is directly connected, Serial1/0
12.12.12.1/32 is directly connected, Serial1/0
23.0.0.0/24 is subnetted, 1 subnets
23.23.23.0 [90/2172416] via 12.12.12.2, 00:05:39, Serial1/0

R1#ping 1.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms

R1#ping 2.2.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/11/16 ms

R1#ping 3.3.3.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/32/40 ms

EIGRP itu secara default melakukan update secara multicast (224.0.0.10), nah pada lab kali ini kita akan merubahnya menjadi unucast update

Pertama kita akan cek terlebih dahulu update EIGRP pada R1 kemudian konfig pada R1 untuk merubah unicast link dari R1-R2

R1#debug ip packet detail
IP packet debugging is on (detailed)
*May 4 17:22:42.427: IP: s=12.12.12.1 (local), d=224.0.0.10 (Serial1/0), len 60, sending, proto=88
*May 4 17:22:42.435: IP: s=12.12.12.1 (local), d=224.0.0.10 (Serial1/0), len 60, sending full packet, proto=88

R1(config)#router eigrp 10
R1(config-router)#neighbor 12.12.12.2 s1/0

R2(config)#router eigrp 10
R2(config-router)#neighbor 12.12.12.1 s1/0

Selanjutnya cek kembali da pastikan update nya sudah berubah ke ip neighbornya

R1#debug ip packet detail
IP packet debugging is on (detailed)
*May 4 17:22:42.427: IP: s=12.12.12.1 (local), d=12.12.12.2 (Serial1/0), len 60, sending, proto=88
*May 4 17:22:42.435: IP: s=12.12.12.1 (local), d=12.12.12.2 (Serial1/0), len 60, sending full packet, proto=88

Alhamdulillah postingan kali ini telah selesai, jika artikel ini terasa bermanfaat silahkan bisa di share dengan menekan salah satu button dibawah ini.

Wassalamu'alaikum ...

Share this :